Thermal Dynamics Plasma Cutmaster 42

Description

The Cutmaster 42 is used and I’m the original owner. This machine has been used very little.
It’s designed for extended use and can cut up to 1/4" capacity. Using 120v or 230 voltage, it has the versatility needed for shop, and on site use. The 230V option ads exteneded power to the heavier cutting needes
Cuts up to 1/4" (6 mm), but has the cut capacity of an 1/2" (12 mm) machine
Compact and lightweight, only 26 lbs. (11.8kg) for serious portability
Quick disconnect torch (ATC(R)) and lead extensions
Features two power plugs, one for the standard 120V outlet and another plug for a 230V outlet
Max Amperage Output - (Amps) 27 @ 120V 40 @ 230V
Recommended Cut before cool down - Inches (mm) 0.250 (6), Max Cut - Inches (mm) 0.625 (15)
Pierce Rating - Inches (mm) 0.250 (6)
Duty Cycle (@40°) 40% @ 40A
Amperage Draw 29A @ 120V 15A @ 230V
Dimensions - (H x W x L) Inches (mm) 9 x 7 x 18.5 (228 x 117 x 470)